Radyne QAM256 Manual de usuario descargar pdf (Pagina 62)

User Manual

Chapter 2. Installation

Page 2-28 P/N 2349-72712-01

Table 2-16: Central Server Configuration Dialog

Parameters

PARAMETER DESCRIPTION

IP Address Changes the IP Address of the computer where the

Central Server is running.

External IP address For a computer with one network card – this

parameter should be equal to the IP address.

For a computer with two network cards – this

parameter should be equal to the external IP

address.

Base Port Changes the Port number of the Central Server.

Must be 4161.

Num. Of Port This parameter default value is 100 and should not

be changed.

The proxy uses several communication ports to split

the amount of data between all the ports.

The ports that are being used are all the ports from

[Base Port] to [Base Port + Num. of Port].

The following ports are used in the example above:

4161, 4162, 4260, 4261.

Notification Port This parameter default value is 162 and should not

be changed.

Community Changes the Central Server community. All Central

Servers should have the same community name:

“central”. The community name is case sensitive.

Notif. Type This parameter default value is “Trap” and should

not be changed.

Retransmit Policy –

Timeout (sec)

The parameter value should be one of the following:

• 7.5 – for fast redundancy

• 14.5 – for slow redundancy

Retransmit Policy –

Retries

This parameter default value is 3 by default and

should not be changed.

1 2 ... 57 58 59 60 61 62 63 64 65 66 67 ... 197 198

Sin comentarios

Radyne QAM256 Manual de usuario Pagina 62